Features Potassium monopersulfate compound can be used after compounding on swimming pools disinfection to reduce the organic content of water. The water in swimming pools/SPA becomes clear and transparent after the oxidation treatment of potassium monopersulfate compound. Because PMPS contains no chlorine, it does not combine with organic contaminants to form chloramines or produce a stimulating chloramine odor. It also has a good inhibitory effect on the growth of bacteria and algae in water. Performance (1)A powerful non-chlorine oxidizer (does not contain chlorine). (2)It uses reactive oxygen (“active oxygen”) to destroy contaminants in pool and spa water such as those found in sweat, urine and wind-blown debris. (3)Since it is chlorine free, it will not form combined chlorine or chloramine irritation and odor. (4)Proper application gives excellent water clarity. (5)Completely soluble in pool and spa/hot tub water. (6)Does not contain stabilizer (cyanuric acid) or calcium. (7)May reduce alkalinity and pH over time. (8)Addition of PMPS temporarily increases oxidation-reduction potential. Natai Chemical in the Field of Swimming pool/SPA Cleaning With the rapid development of China, the types and quantities of inorganic and organic pollutants in water are increasing, and it is difficult to degrade some stable pollutants by traditional degradation methods. Therefore advanced oxidation technology was born. It has been recognized by the industry because its reaction speed is fast and no secondary pollution was produced when using. Over the years, Natai Chemical has been committed to the research and development, production and sales of potassium monopersulfate compound. At present, Natai Chemical has cooperated with a lot of clients on swimming pool/SPA cleaning worldwide and won high praise. Besides swimming pool/SPA cleaning, Natai Chemical also enters other PMPS-related market with some success. CONTACT US！